Name: Fabrication and Characterisation of Chitosan -Palm Fiber Reinforced (en Inglés)
SKU: 66364827
Price: 1013.29 MXN
Availability: InStock
Author: Reddy, K. Dharma; Hemasekhar, Puttam
ISBN: 9786209332968

portada Fabrication and Characterisation of Chitosan -Palm Fiber Reinforced (en Inglés)

Fabrication and Characterisation of Chitosan -Palm Fiber Reinforced (en Inglés)

Formato

Libro Físico

Editorial

LAP Lambert Academic Publishing

Autor

Reddy, K. Dharma; Hemasekhar, Puttam

Idioma

Inglés

N° páginas

Encuadernación

Tapa Blanda

Dimensiones

22.9x15.2x0.3 cm

ISBN13

9786209332968

Fabrication and Characterisation of Chitosan -Palm Fiber Reinforced (en Inglés)

Reddy, K. Dharma; Hemasekhar, Puttam (Autor) · LAP Lambert Academic Publishing · Tapa Blanda

Libro Nuevo Importado

Envío: 22 a 27 días háb.

$ 1,842.34$ 1,013.29

-45%

Costos de importación incluídos en el precio ✅

Libro Nuevo

Quedan 10 unidades

$ 1,013.29

¡Envío Gratis! Llega entre el 20 Nov y el 30 Nov a CUAUHTÉMOC, Ciudad de México. Seleccionar ubicación

Agregar a lista de deseos

Reseña del libro "Fabrication and Characterisation of Chitosan -Palm Fiber Reinforced (en Inglés)"

Palm fiber, an abundant and eco-friendly lignocellulosic material, offers significant potential as a natural reinforcement in polymer matrix composites. In this study, palm fibre-reinforced polyester composites were fabricated using chitosan as a natural biofilter to enhance bonding and thermal stability. Three composite plates were prepared with varying filler concentrations (1%, 3%, and 5%) while keeping the fibre content constant at 60%. The specimens were produced using the hand lay-up technique and subjected to mechanical and thermal characterisation, including tensile, flexural, impact, hardness, thermal conductivity, water absorption, flammability, and machinability tests.The results indicate that moderate chitosan filler content (3%) enhances the fibre-matrix interfacialadhesion, thereby improving tensile and flexural strengths. Increased filler concentration beyond 5% slightly reduces mechanical performance due to filler agglomeration.