Name: An Experimental Investigation of the Effect of Dimples on Turbine Adiabatic Film Cooling (en Inglés)
SKU: 59807971
Price: 477.46 MXN
Availability: InStock
Author: Roland, Isaac
ISBN: 9781288319107

portada An Experimental Investigation of the Effect of Dimples on Turbine Adiabatic Film Cooling (en Inglés)

An Experimental Investigation of the Effect of Dimples on Turbine Adiabatic Film Cooling (en Inglés)

Formato

Libro Físico

Autor

Isaac Roland

Editorial

Biblioscholar

Idioma

Inglés

N° páginas

102

Encuadernación

Tapa Blanda

Dimensiones

24.6x18.9x0.5 cm

Peso

0.20 kg.

ISBN13

9781288319107

Categorías

Educación

An Experimental Investigation of the Effect of Dimples on Turbine Adiabatic Film Cooling (en Inglés)

Isaac Roland (Autor) · Biblioscholar · Tapa Blanda

Libro Nuevo Importado

Envío: 14 a 18 días háb.

$ 1,061.02$ 477.46

-55%

Costos de importación incluídos en el precio ✅

Libro Nuevo

Quedan 50 unidades

$ 477.46

Llega entre el 30 Sep y el 07 Oct a CUAUHTÉMOC, Ciudad de México. Seleccionar ubicación

Agregar a lista de deseos

Reseña del libro "An Experimental Investigation of the Effect of Dimples on Turbine Adiabatic Film Cooling (en Inglés)"

This experiment explored the ability of a row of cylindrical dimples' vortex shedding to entrain the cooling film in the boundary layer for longer distances, thus enhancing cooling on a turbine leading edge model. The experiment utilized a semi-cylindrical leading edge followed by an after body with straight surfaces. A foam leading edge drilled with cooling holes allowed for a determination of adiabatic film effectiveness using an Infrared Thermography (IR) technique to measure surface temperature distributions. Two test models were utilized, one with a row of seven dimples placed upstream from the cooling-hole, while the other model had a row of seven downstream. Five blowing ratios were tested: 0.5, 0.75, 1.0, 1.25, and 1.5. It was observed that the dimples introduced disturbances in the boundary layer that encouraged vertical and lateral diffusion of the cooling film that caused reattachment of coolant jet liftoff. Dimples placed upstream of the cooling hole improved spanwise averaged adiabatic film cooling effectiveness by up to 60% for far downstream locations. Dimples placed downstream of the cooling hole enhanced up to 30% for far downstream locations.